hello, i have a server member of cluster formed with 3 node windows 2008 r2 disjoined from AD
how to rejoined it ??
thank you
↧
rejoined a node
↧
public network partitioned after reboot
Hello,
I am experiencing an issue with a 2-node Windows Server 2008 R2 failover cluster.
All cluster validation tests do not report any problems.
Symptoms:
- McAfee version 4.5 has been installed
- The witness disk and c:\windows\cluster have been excluded from scanning
- The status of the Public Network becomes partitioned after failing over all resources from the active node to the passive node and then restarting the node that has become passive.
Steps to reproduce:
1) Failover all resources to the passive node.
2) Restart the node that has now become passive
After the node has rejoined the cluster, the status of the Public Network will become partitioned.
If you look at the details of the Public Network, the status will be “unreachable” on both nodes.
Steps to resolve:
1) Stop the cluster service on the passive node.
The status Public Network on the active node will now be “Up”.
The status Public Network on the passive node will now be “Unavailable”
2) Start the cluster service on the active node
The status of the Public Network on both nodes will now be “Up”.
Any help would be appreciated.
Jeroen
↧
↧
how to delete a failed file share witness
I have a 2 node 2008SP2 (Geographically separated) cluster. I use file and node majority for quorum. There is a file share at third site and both nodes can ping/open the share and the nodes have full controll of the share. Also, there are other cluster/nodes using the same share for quorum. This has worked for several years. After the last round of MS patches the file share witness resource would not come back online for 1 cluster. I tried forcing it online several times but I cancelled after 10 minutes or so. I found that I can add another folder in the original location and reran the qurom wizard, and it came online. I am guessing that maybe the multiple clusters using the same single folder is not good, not sure why it worked for so long though. Anyway, the delete function is gone from the failed file share witness, how can I get rid of the old failed resource?
Thanks
~M
↧
Volume Mount Points in Server 2012 Failover Cluster
I am trying to figure how I configure a LUN to use a Mount Point and be available in a failover cluster. I am currently only able to access a LUN if it is set as a CSV Volume or assigned a drive letter. I was able to access mount points successfully
in 2008 but can't seem to get this working with 2012. Has this been removed from 2012?
↧
The access disk is more slow when insert 10st disk with Windows Server 2008 R2 Spanish in MSCS with SQL 2008R2
I have a problem in a MSCS when add more than 9 disk in the nodes.
When add 10 disk, the disk management is more slow and all operations whit disks spend a lot of time. The access to disk needs about 5 minutes for get a Backup of SQL (only for open the browser), and each operation needs 5 minutes too. Access to diskpart, access to disk management, change de node of SQL... needs this 5 minutes and if the number of disk increases the wait increases too.
The Storage is in EVA HP P6500.
In Exchange 2010 with DAG I have the same problem.
It's possible because the O.S are in Spanish??? How I can make the access faster? With 9 disks the access is fine but one disk marks the difference.
↧
↧
Cannot add cluster disk on windows 2012
I have 2 servers connected to a shared storage array using Fibre Channel. Currently there are 2 luns on the storage device.
From the Failover Cluster Manager, when I select “Add Disk” from Storage – Disks, both luns show up and I can add them without problems. But if I choose to only add one of them first (it doesn't make a difference which one is added first), then it will not allow adding the second one later. I get a message: "No disks suitable for cluster disks were found. For diagnostic information about disks available to the cluster, use Validate a Configuration Wizard to run Storage tests."
When I do add one (or both disks at the same time), they work just fine for failover clustering.
I can’t imagine this is by design. Is this a known/unknown issue, or is there something special that needs to be done?
Thanks
↧
dfs for quorum file share witness in AG config?
Hi,
I'm setting up my first AG using 2 nodes at two sites. We setup a DFS path that points to and replicates a share on both nodes that I'd like to use as the Quorum File Share. That way my Quorum would have a vote as long as one of the sites is online. When using the wizard, it says the DFS path is not valid. I have permissions set so that the cluster object, nodes, and service accounts have write permissions on the share. I found one reference that said DFS is not recommended for a Quorum, but I haven't found anything that says why or that I can't do it.
Is it possible to set the Quorum File Share Witness to be a DFS path? If so, how do I do it (can it be scripted instead of using the wizard)?
I have yearly mandatory shutdowns at each site that i want to avoid by replicating the Quorum rather than losing the cluster if the site containing my Quorum goes down. My other option is to deploy at a third site, but that site too has mandatory shutdowns. I need to support automatic and manual failovers. It's an entirely company-internal environment; I can't use any external cloud computing solutions.
Thanks greatly for your time.
cheers.
↧
Question about a failover issue with Windows 2012 cluster
Hi all,
I implemented at one of my Customer a Windows cluster 2012 for SQL Server AlwaysOn and we faced a problem during a failover test scenario but I just want anyone to confirm if the behavior is normal or not and why.
My configuration is the following :
2 cluster nodes with Windows Server 2012 and a FSW. We don't have a shared storage for this cluster.
We have two network cards on each server. One card ("public") is used for cluster and client communcation and the other ("private") is used for cluster network communication only. The communication between the 2 nodes and the FSW (located on a fileshare server on the same domain) are made by using the "public" card.
We tested different failover scenarios :
1- Shutdown one node --> the failover of the core resources (FSW, name and ip of the cluster) is ok
2- Turn off one node --> failover ok
3- Disable the "private" card on one node --> cluster is ok
4- Disable the "public" card on one node --> no failover occurs and all the core resources are in the failed state
I don't understand why in the situation number 4 the failover doesn't occur. If I issue a manual failover of the core resources the failover works well. If I disable the "private" card after disabling the "public" card on one node the failover also occurs. Is this behavior normal for you ?
Thanks in advance for your responses
++
We have
MCDBA | MCITP SQL Server 2005 / SQL Server 2008 | LPI Linux 1
↧
Cluster Disk failover problem
Hi Everyone
I have built a Windows 2008 R2 Failover Cluster. It is scheduled to be a HyperV cluster, but I have removed HyperV from the equation as I am having problems.
Its a 2 node cluster connecting to a PS4000 via iscsi.
Network config is
Nic 1 - Host and Cluster Management - 10.160.19.x/24
Nic 2 & 3 - icsci 10.160.46..x/24, MPIO,
Nic 4 - CSV - 10.160.47/24
Nic 5 - LiveMigration - 10.160.49.x/24
Nic6 - VMSwitch - HyperV Virtual Machine "External" nic.
The cluster ip is on 10.160.19.x.
The Cluster validation passes sucessfully and so does creating the cluster and performing post creating validations. When I simulate failures of the Quorum disk, it fails over to the second node after requisites retrys on the first node...all good.
However when I simulate failures on the second cluster disk, it just fails on the primary node. I can bring it online on same node or if I stop the cluster service on that node, everything successfully fails over to the second node. But automatic/simulating failover isn't working.
When I dump out the cluster log(below)this is all the entries pertaining to the failover attempt. Sorry for the log dump.
My analysis of the log, leads me in two directions, Is my nic assignment and config correct? Can I confirm the Cluster disk guids are identical between nodes?
I appreciate any assistance. Apologies on the large log.
Thanks
[NM] Received request from client address 10.160.19.22.
00000b18.00000f50::2011/01/13-16:10:32.005 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.005 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:32.005 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000f50::2011/01/13-16:10:32.005 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:32.005 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmApi::FailResource: (VM1)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'VM1', gen(1) result 0.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) Online-->ProcessingFailure.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Online --> Failed)
00000730.00000d40::2011/01/13-16:10:35.296 ERR [RCM] rcm::RcmResource::HandleFailure: (VM1)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] resource VM1: failure count: 1, restartAction: 2.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] Will restart resource in 500 milliseconds.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Failed --> Pending)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000bd4.00000eb0::2011/01/13-16:10:35.296 INFO [RES] Physical Disk <VM1>: Terminate request.
00000bd4.00000eb0::2011/01/13-16:10:35.327 WARN [RES] Physical Disk <VM1>: Terminate: Failed to offline volume \Device\Harddisk3\Partition1, Error 5
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000bd4.00000eb0::2011/01/13-16:10:35.343 INFO [RES] Physical Disk <VM1>: HardDiskpCloseSVIHandles: Exit
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.437 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.437 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.437 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.437 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.437 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000eb0::2011/01/13-16:10:36.263 INFO [RES] Physical Disk: ReleaseDisk: stop reserve succeeded on device 3 (sig 44423655)
00000730.00000d30::2011/01/13-16:10:36.279 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'VM1', gen(2) result 0.
00000730.00000d30::2011/01/13-16:10:36.279 INFO [RCM] TransitionToState(VM1) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
00000730.00000d3c::2011/01/13-16:10:36.794 INFO [RCM] Delay-restarting VM1 and any waiting dependents.
00000730.00000d3c::2011/01/13-16:10:36.794 INFO [RCM] TransitionToState(VM1) DelayRestartingResource-->OnlineCallIssued.
00000bd4.00000eb0::2011/01/13-16:10:36.794 INFO [RES] Physical Disk <VM1>: Online request.
00000730.00000298::2011/01/13-16:10:36.794 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'VM1', gen(2) result 997.
00000730.00000298::2011/01/13-16:10:36.794 INFO [RCM] TransitionToState(VM1) OnlineCallIssued-->OnlinePending.
00000bd4.00000c04::2011/01/13-16:10:36.794 INFO [RES] Physical Disk <VM1>: Arbitrate request: FastPath 0
00000bd4.00000c04::2011/01/13-16:10:36.794 INFO [RES] Physical Disk: Enter EnumerateDevices: EnumDevice 0
00000bd4.00000c04::2011/01/13-16:10:36.809 INFO [RES] Physical Disk: Exit EnumerateDevices: status 0
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk: Successful reserve, disk is unowned, key 4daf7466734d
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk: Update disk props returns 0
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk <VM1>: Disk is offline
00000730.00000298::2011/01/13-16:10:36.841 INFO [GUM] Node 1: Processing RequestLock 1:42
00000730.00000314::2011/01/13-16:10:36.841 INFO [GUM] Node 1: Processing GrantLock to 1 (sent by 2 gumid: 566)
00000bd4.00000c04::2011/01/13-16:10:36.841 WARN [RES] Physical Disk <VM1>: OnlineThread: Failed to get volume guid for device\\?\GLOBALROOT\Device\Harddisk3\Partition1\. Error 3
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000bd4.00000bf8::2011/01/13-16:10:36.856 INFO [RES] Physical Disk: PNP: Adding volume
\\?\STORAGE#Volume#{73432ff7-18ee-11e0-aded-0026b93b46a0}#0000000000100000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
00000bd4.00000f30::2011/01/13-16:10:36.856 INFO [RES] Physical Disk <VM1>: Completed HardDiskpUpdateRegistryWorker (start time 16:10:36.841)
00000bd4.00000bf8::2011/01/13-16:10:36.856 INFO [RES] Physical Disk: PNP: Add Volume exit, status 0
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000298::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000c04::2011/01/13-16:10:40.850 WARN [RES] Physical Disk <VM1>: OnlineThread: Failed to set volguid \??\Volume{7343300a-18ee-11e0-aded-0026b93b46a0}. Error: 183.
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk <VM1>: Found 2 mount points for device \Device\Harddisk3\Partition1
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk <VM1>: VolumeIsNtfs: Volume\\?\GLOBALROOT\Device\Harddisk3\Partition1\ has FS type NTFS
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: Volume\\?\GLOBALROOT\Device\Harddisk3\Partition1\ has FS type NTFS
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: MountPoint V:\ points to volume\\?\Volume{7343300a-18ee-11e0-aded-0026b93b46a0}\
00000bd4.00000c04::2011/01/13-16:10:40.850 DBG [ClRtl] CaptureShareInfo: Share 0000000000000050, Server 0000000000000000, Path 0000000000000056 SD 0000000000000000 size 242
00000bd4.00000c04::2011/01/13-16:10:40.850 WARN [ClRtl] SsCoreShareAdd(): status = 2118 share = V$ server = (null)
00000bd4.00000c04::2011/01/13-16:10:40.850 DBG [ClRtl] CaptureShareInfo: Share 0000000000000050, Server 0000000000000000, Path 0000000000000056 SD 0000000000000000 size 242
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RHS] Resource VM1 has come online. RHS is about to report status change to RCM
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'VM1', gen(2) result 0.
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] TransitionToState(VM1) OnlinePending-->Online.
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Pending --> Online)
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: DriveLetter mask: 0x200000
00000b18.00000c1c::2011/01/13-16:10:40.896 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.896 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.896 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.896 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.896 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmApi::FailResource: (VM1)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'VM1', gen(3) result 0.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) Online-->ProcessingFailure.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Online --> Failed)
00000730.00000d40::2011/01/13-16:10:47.354 ERR [RCM] rcm::RcmResource::HandleFailure: (VM1)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] resource VM1: failure count: 2, restartAction: 2.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) ProcessingFailure-->[WaitingToTerminate to Failed].
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Failed --> Pending)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) [WaitingToTerminate to Failed]-->[Terminating to Failed].
00000bd4.00000eb0::2011/01/13-16:10:47.354 INFO [RES] Physical Disk <VM1>: Terminate request.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] Resource VM1 is causing group Available Storage to failover. Posting worker thread.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::Failover: (Available Storage)
00000bd4.00000eb0::2011/01/13-16:10:47.417 WARN [RES] Physical Disk <VM1>: Terminate: Failed to offline volume \Device\Harddisk3\Partition1, Error 5
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.0000076c::2011/01/13-16:10:47.448 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000eb0::2011/01/13-16:10:47.666 INFO [RES] Physical Disk <VM1>: HardDiskpCloseSVIHandles: Exit
00000bd4.00000eb0::2011/01/13-16:10:48.259 INFO [RES] Physical Disk: ReleaseDisk: stop reserve succeeded on device 3 (sig 44423655)
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'VM1', gen(4) result 0.
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] TransitionToState(VM1) [Terminating to Failed]-->Failed.
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Pending --> Failed)
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] Not failing over group Available Storage, failoverCount 1, failover threshold 0, nodeAvailCount 0.
00000730.00000d40::2011/01/13-16:10:48.384 INFO [RCM] Will retry online of VM1 in 3600000 milliseconds.
00000b18.00000c1c::2011/01/13-16:10:48.384 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.384 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:48.384 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
↧
↧
Network load balancing
Hi all,
i have basic questation about NLB . If I use mutlicast mode , must dedicated adress from the same subnet ? How works reply to request ? With adress nlb or dedicated adress ?
thanx
Falcon
↧
Clustering times out when attempting MSCS for Exchange 2007 SCC
Situation:
Attempting to build Exchange 2007 SCC environment. The two vmware virtual nodes pass the verification wizard but fail/time out when doing the actual MSCS wizard. I attempt to build the cluster using Failover Cluster Manager and list both systems as nodes for the cluster, the process stalls/"sits there" when it says "building the cluster" (last step of the chain in wizard before finish) and then ultimately times out leading to failure.
Attempted to build the cluster in parts, so I put system A/Eagle/.57 into cluster with zero issue. When I attempt to join system B/Hawk/.58, the join process stops/hangs at "Waiting for notification that node hawk is a fully functional member of the cluster." Running "cluster log /g /level:5" produces an output but the contents do not make any sense. Will post the output following this post for review.
ESX Nodes:
Four physical systems running ESX 4.0 (have not updated to 4.1 or 4.2). Each node in cluster has 2 Quadcore CPU, 48 GB RAM, 12 NIC ports (4 for production network (2 active/2 standby), 2 for FT/HA, 2 for iSCSI, 2 for private isolated network, and 2 unused connections), and a single HBA card with dual connections (port0 connects to controller A of FC SAN, port1 connects to ContollerB of FC SAN). There is not a FC Switch between cluster nodes and SAN.
Virtual Systems:
The non-shard drives are on Dell MD3000i iSCSI SAN and the shard drives (10 total) reside on Dell AX4-5 FC SAN. System-1 has the mappings for the RDM which are used by System-2. DRS is enabled by default but disabled for System1 and System2 so that I can put them both on a single node if necessary. System1 and System2 presently reside on seperate systems to prevent data corruption or connection confusion within the system. System.57 and System.58 are on same networks with same gateway and sub-net mask. Each vm system that will be part of the SCC has two interfaces. One for production network (XXX.XXX.4.__) and one for private network (called MSCS)(192.168.1.__). MSCS network has 192.168.x.x addresses and has no access to the production network as it was intended for internal communication between the two nodes for heartbeats. IPv6 was disabled/unchecked on all interfaces.
Questions:
1) I am lost as to where to look or what is causing the node addition to fail. Any ideas?
2) Does the MSCS even need the second interface to function? Is the second interface the problem?
3) Does the second interface need to be on production network as a method to connect to the systems outside of the interface used for Exchange traffic?
**Please excuse the fact I have sanitized some of the following data for security reasons.**
Did a ipconfig on the system that is already in cluster and the following was the output:
Windows IP Configuration
Ethernet adapter XXXXXX:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : XXX.XXX.4.57
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IPv4 Address. . . . . . . . . . . : XXX.XXX.4.59
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : XXX.XXX.4.1
Ethernet adapter MSCS:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 192.168.1.25
Subnet Mask . . . . . . . . . . . : 255.255.255.248
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection* 14:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{149940B7-9D2B-4B5B-B602-2B44EFC61449}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{9BFBCFA3-01B0-41ED-A4E6-A77ED244E05F}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{1575EC05-3AF4-4409-9076-483A534ABADE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
ipconfig from system which I am attempting to add:
Windows IP Configuration
Ethernet adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter XXXXXX:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : XXX.XXX.4.58
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : XXX.XXX.4.1
Ethernet adapter Private:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 192.168.1.26
Subnet Mask . . . . . . . . . . . : 255.255.255.248
Default Gateway . . . . . . . . . :
Tunnel adapter isatap.{6DB4FDA5-1DF4-4C5D-AACD-91B72681E1E9}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{139F2C67-0167-4286-8A10-D3130014CB03}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{289C9F6E-57A2-48EA-A8AD-BCC3914277CE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Attempting to build Exchange 2007 SCC environment. The two vmware virtual nodes pass the verification wizard but fail/time out when doing the actual MSCS wizard. I attempt to build the cluster using Failover Cluster Manager and list both systems as nodes for the cluster, the process stalls/"sits there" when it says "building the cluster" (last step of the chain in wizard before finish) and then ultimately times out leading to failure.
Attempted to build the cluster in parts, so I put system A/Eagle/.57 into cluster with zero issue. When I attempt to join system B/Hawk/.58, the join process stops/hangs at "Waiting for notification that node hawk is a fully functional member of the cluster." Running "cluster log /g /level:5" produces an output but the contents do not make any sense. Will post the output following this post for review.
ESX Nodes:
Four physical systems running ESX 4.0 (have not updated to 4.1 or 4.2). Each node in cluster has 2 Quadcore CPU, 48 GB RAM, 12 NIC ports (4 for production network (2 active/2 standby), 2 for FT/HA, 2 for iSCSI, 2 for private isolated network, and 2 unused connections), and a single HBA card with dual connections (port0 connects to controller A of FC SAN, port1 connects to ContollerB of FC SAN). There is not a FC Switch between cluster nodes and SAN.
Virtual Systems:
The non-shard drives are on Dell MD3000i iSCSI SAN and the shard drives (10 total) reside on Dell AX4-5 FC SAN. System-1 has the mappings for the RDM which are used by System-2. DRS is enabled by default but disabled for System1 and System2 so that I can put them both on a single node if necessary. System1 and System2 presently reside on seperate systems to prevent data corruption or connection confusion within the system. System.57 and System.58 are on same networks with same gateway and sub-net mask. Each vm system that will be part of the SCC has two interfaces. One for production network (XXX.XXX.4.__) and one for private network (called MSCS)(192.168.1.__). MSCS network has 192.168.x.x addresses and has no access to the production network as it was intended for internal communication between the two nodes for heartbeats. IPv6 was disabled/unchecked on all interfaces.
Questions:
1) I am lost as to where to look or what is causing the node addition to fail. Any ideas?
2) Does the MSCS even need the second interface to function? Is the second interface the problem?
3) Does the second interface need to be on production network as a method to connect to the systems outside of the interface used for Exchange traffic?
**Please excuse the fact I have sanitized some of the following data for security reasons.**
Did a ipconfig on the system that is already in cluster and the following was the output:
Windows IP Configuration
Ethernet adapter XXXXXX:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : XXX.XXX.4.57
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IPv4 Address. . . . . . . . . . . : XXX.XXX.4.59
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : XXX.XXX.4.1
Ethernet adapter MSCS:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 192.168.1.25
Subnet Mask . . . . . . . . . . . : 255.255.255.248
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection* 14:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{149940B7-9D2B-4B5B-B602-2B44EFC61449}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{9BFBCFA3-01B0-41ED-A4E6-A77ED244E05F}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{1575EC05-3AF4-4409-9076-483A534ABADE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
ipconfig from system which I am attempting to add:
Windows IP Configuration
Ethernet adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Ethernet adapter XXXXXX:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : XXX.XXX.4.58
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : XXX.XXX.4.1
Ethernet adapter Private:
Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 192.168.1.26
Subnet Mask . . . . . . . . . . . : 255.255.255.248
Default Gateway . . . . . . . . . :
Tunnel adapter isatap.{6DB4FDA5-1DF4-4C5D-AACD-91B72681E1E9}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{139F2C67-0167-4286-8A10-D3130014CB03}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{289C9F6E-57A2-48EA-A8AD-BCC3914277CE}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
↧
Received 3 warning during SQL Server 2008 setup for clustering
Hi All there..it's me again and again
During my SQL Server 2008 setup, i received this 3 following warning. Unfortunately this is only warning not failed
Below are the warning :
1 .Rule "Distributed Transaction Coordinator (MSDTC) clustered" generated a warning. The MSDTC service is not clustered. Some features of SQL Server will fail to work when clustered if the MSDTC service is not clustered and bla bla bla
2. Rule "Microsoft .NET Application Security" generated a warning. the computer cannot access the internet. there might be delays in starting a .NET application like management Studio. If navigate to
http://crl.microsoft.com/pki/crl/products/MicrosoftRootAuthority.crl and are prompted to download the
MicrosoftRootAuthority.crl file you should not have .NET security validation issues. It is not necassasry to download the MicrosoftRootAuthority.crl file.
3. Rule "Network binding order" generated a warning. The domain network is not the first bound network. This will cause domain operation to run slowly and can cause timeouts that result in failure. Use the Window network advanced configuration to change the binding order
For warning no.1, am i supposed to configure MSDTC Resources just like in Clustering win server 2003? Meaning do i need to create "MS DTC IP address", "MS DTC Network Name" and "MS DTC"??
For warning no.2, i have no idea what am i supposed to do
For warning no.3, i did change the binding order by doing placing the Public NIC above Hearbeat NIC under the tab "Adapter and binding" in "Advance Setting" option for both nodes....
TQVM for assisting me in advance
During my SQL Server 2008 setup, i received this 3 following warning. Unfortunately this is only warning not failed
Below are the warning :
1 .Rule "Distributed Transaction Coordinator (MSDTC) clustered" generated a warning. The MSDTC service is not clustered. Some features of SQL Server will fail to work when clustered if the MSDTC service is not clustered and bla bla bla
2. Rule "Microsoft .NET Application Security" generated a warning. the computer cannot access the internet. there might be delays in starting a .NET application like management Studio. If navigate to
http://crl.microsoft.com/pki/crl/products/MicrosoftRootAuthority.crl and are prompted to download the
MicrosoftRootAuthority.crl file you should not have .NET security validation issues. It is not necassasry to download the MicrosoftRootAuthority.crl file.
3. Rule "Network binding order" generated a warning. The domain network is not the first bound network. This will cause domain operation to run slowly and can cause timeouts that result in failure. Use the Window network advanced configuration to change the binding order
For warning no.1, am i supposed to configure MSDTC Resources just like in Clustering win server 2003? Meaning do i need to create "MS DTC IP address", "MS DTC Network Name" and "MS DTC"??
For warning no.2, i have no idea what am i supposed to do
For warning no.3, i did change the binding order by doing placing the Public NIC above Hearbeat NIC under the tab "Adapter and binding" in "Advance Setting" option for both nodes....
TQVM for assisting me in advance
↧
Server 2012 cluster - virtual machine live migration does not work
Hi,
We have a hyper-v cluster with two nodes running Windows Server 2012. All the configurations are identical.
When I try to make a Live migration from one node to the other I get an error message saying:
Live migration of 'Virtual Machine XXXXXX' failed.
I get no other error messages, not even in event viewer. This same happens with all of our virtual machines.
A normal Quick migration works just fine for all of the virtual machines, so network configuration should not be an issue.
The above error message does not provide much information.
↧
↧
The Cluster service is shutting down because quorum was lost
We tried every option suggested in the above article and also lot of other things in technet site.
But still we have some issues in DAG, where it automatically failover from one mailbox server to another.
Isatap interface isatap.{} is no longer active.
Cluster node '' was removed from the active failover cluster membership. The Cluster service on this node may have stopped. This could also be due to the node having lost communication with other active nodes in the failover cluster. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapters on this node. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. Run the Validate a Configuration wizard to check your network configuration. If the condition persists, check for hardware or software errors related to the network adapter. Also check for failures in any other network components to which the node is connected such as hubs, switches, or bridges.
Can someone help us to get the solution for this as it is very much frustrating with DAG & win 2k8 R2
↧
How to schedule to restart of the SIS service when cluster fails over?
We are running 2008r2 Storage Server with a 2 node cluster(node and disk majority). It sounds like that when the cluster fails over, we need to have the new active node restart the Microsoft Groveler Service because we have SIS enabled on the cluster disks. How can I schedule the new active nodes to restart the groveler service after a cluster failover? I can probably just have the service restarted once a day on both nodes and we would be fine, but that seems like a bad work-around.
Thanks,
Dan
Dan Heim
↧
public network partitioned after reboot
Hello,
I am experiencing an issue with a 2-node Windows Server 2008 R2 failover cluster.
All cluster validation tests do not report any problems.
Symptoms:
- McAfee version 4.5 has been installed
- The witness disk and c:\windows\cluster have been excluded from scanning
- The status of the Public Network becomes partitioned after failing over all resources from the active node to the passive node and then restarting the node that has become passive.
Steps to reproduce:
1) Failover all resources to the passive node.
2) Restart the node that has now become passive
After the node has rejoined the cluster, the status of the Public Network will become partitioned.
If you look at the details of the Public Network, the status will be “unreachable” on both nodes.
Steps to resolve:
1) Stop the cluster service on the passive node.
The status Public Network on the active node will now be “Up”.
The status Public Network on the passive node will now be “Unavailable”
2) Start the cluster service on the active node
The status of the Public Network on both nodes will now be “Up”.
Any help would be appreciated.
Jeroen
↧
Cluster shared volume disappear... STATUS_MEDIA_WRITE_PROTECTED(c00000a2)
Hi all, I am having an issue hopefully someone can help me with. I have recently inherited a 2 node cluster, both nodes are one half of an ASUS RS702D-E6/PS8 so both nodes should be near identical. They are both running Hyper-V Server 2008 R2 hosting some 14 VM's.
Each node is hooked up via cat5e to a PromiseVessRAID 1830i via iSCSI using one of the servers onboard NICs each, whose cluster network is setup as Disabled for cluster use (the way I think it is supposed to be not the way I had originally inherited it) on it's own Class A Subnet and on it's own private physical switch...
The SAN hosts a 30GB CSV Witness Disk and 2 2TB CSV Volumes, one for each node labeled Volume1 and Volume2. Some VHD's on each.
The Cluster Clients connect to the rest of the company via the Virtual ExternalNIC adapters created in Hyper-V manager but physically are off of Intel ET Dual Gigabit adapters wired into our main core switch which is set up with class c subnets.
I also have a crossover cable wired up running to the other ports on the Intel ET Dual Port NICs using yet a third Class B Subnet and is configured in the Failover Cluster Manger as internal so there are 3 ipv4 Cluster networks total.
Even though the cluster passes the validation tests with flying colors I am not convinced all is well. With Hyperv1 or node 1, I can move the CSV's and machines over to hyperv2 or node 2, stop the cluster service on 1 and perform maintenance such as a reboot or install patches if needed. When it reboots or I restart the cluster service to bring it back online, it is well behaved leaving hyperv2 the owner of all 3 CSV's Witness, Volume 1 and 2. I can then pass them back or split them up any which way and at no point is cluster service interrupted or noticed by users, duh I know this is how it is SUPPOSED to work but...
if I try the same thing with Node 2, that is move the witness and volumes to node 1 as owner and migrate all VM's over, stop cluster service on node 2, do whatever I have to do and reboot, as soon as node 2 tries to go back online, it tries to snatch volume 2 back, but it never succeeds and then the following error is logged in cluster event log:
Hyperv1
Event ID: 5120
Source: Microsoft-Windows-FailoverClustering
Task Category: Cluster Shared Volume
The listed message is:Cluster Shared Volume 'Volume2' ('HyperV1 Disk') is no longer available on this node because of 'STATUS_MEDIA_WRITE_PROTECTED(c00000a2)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Followed 4 seconds later by:
Hyperv1
event ID: 1069
Source: Microsoft-Windows-FailoverClustering
Task Catagory: Resource Control Manager
Message: Cluster Resource 'Hyperv1 Disk in clustered service or application '75d88aa3-8ecf-47c7-98e7-6099e56a097d' failed.
- AND -
2 of the following:
Hyperv1
event ID: 1038
Source: Microsoft-Windows-FailoverClustering
Task Catagory: Physical Disk Resource
Message: Ownership of cluster disk 'HyperV1 Disk' has been unexpectedly lost by this node. Run the Validate a Configuration wizard to check your storage configuration.
Followed 1 second later by another 1069 and then various machines are failing messages.
If you browse to\\hyperv-1\c$\clusterstorage\ or\\hyperv-2\c$\Clusterstorage\, Volume 2 is indeed missing!!
This has caused me to panic a few times as the first time I saw this I thought everything was lost but I can get it back by stopping the service on node 1 or shutting it down, restarting node 2 or the service on node 2 and waiting forever for the disk to list as failed and then shortly thereafter it comes back online. I can then boot node 1 back up and let it start servicing the cluster again. It doesn’t pull the same craziness node 2 does when it comes online; it leaves all ownership with 2 unless I tell I to move.
I am very new to clusters and all I know at this point is this is pretty cool stuff but basically if it is running don’t mess with it is the attitude I have taken with it but there is a significant amount of money tied up in this hardware and we should be able to leverage this as needed, not wonder if it is going to act up again.
To me it seems for a ‘failover’ cluster it should be way more robust than this...
I can go into way more detail if needed but I didn’t see any other posts on this specific issue no matter what forum I scoured. I’m obviously looking for advice on how to get this resolved as well as advice on whether or not I wired the cluster networks correctly. I am also not sure about what protocols are bound to what nics anymore and what the binding order should be, could this be what is causing my issue?
I have NVSPBIND and NVSPSCRUB on both boxes if needed.
Thanks!
-LW
↧
↧
Windows 2008 R2 SP1 Exchange DAG event 1196 and 1579 Bad DNS Key
Hi,
I'm running an Exchange 2010 SP1 DAG on Windows 2008 R2 SP1. We are using an INFOBLOX appliance for DNS resolution.
DNS resolution is working and SRV records are created.
On one of the two clusternodes I get warning 1579 and error 1196 every 15 minutes. After looking around on the internet and technet, I found kb 977158 stating the problem and resolution. However this hotfix is not applicabel on Windows 2008 R2 SP1 .
How can I resolve these annoying events?
Event 1196 failoverClustering:
Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason:
DNS bad key.
.
Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
Event 1579 Failover Clustering
Cluster network name resource 'Cluster Name' failed to update the DNS record for name 'DAG.domain.local' over adapter 'NIC1-LAN'. The error code was 'DNS bad key. (9017)'. Ensure that a DNS server is accessible from this cluster node and contact your DNS server administrator to verify the cluster identity can update the DNS record 'DAG.domain.local'.
Frederik
↧
SQL 2012 & 2012 Cluster - How to configure an Alias?
We have a server 2012 cluster setup for SQL 2012, we've reconfigured the cluster listening port to 1435 and now I'm trying to configure a alias/network alias to point clients to the correct server/port. On a non-clustered environment this can be done fairly easily using SQL Server configuration manager however with the addition of the cluster things aren't quite as straight forward.
I've found very little information on the subject, one article I found described the use of "setspn" however the article in question doesn't go into much detail on using this within a cluster.
Has anyone had to do this? Seems like a fairly straight forward/regular request but I can't find anything that clearly defines whats required.
-Simon
↧
cluster nodes deleted from AD
Recently we were applying Windows Updates to the nodes in our cluster. When we attempted to move an instance of SQL back to an updated node it failed. I found & fixed a problem with the domain account that SQL runs as on the node where we tried to move to.
When we tried to move SQL again, we got a different error an Event ID 1207 with 'Unable to obtain the Primary Cluster Name Identity token.' In researching this I came accros this Forum entry http://social.technet.microsoft.com/Forums/windowsserver/en-US/9e21b6e4-a5ca-4ee9-bcd6-681a8f32c824/cant-bring-network-name-on-line, which lead me to this as a possible solution https://blogs.technet.com/b/askcore/archive/2009/04/27/recovering-a-deleted-cluster-name-object-cno-in-a-windows-server-2008-failover-cluster.aspx?Redirected=true
So I troop-off to my domain controllers. DNS has the servers & virtual server entries. However, it appears someone deleted the 3 server (nodes) of my cluster from the AD Computers OU.
I restored the AD, but my oldest backup doesn't contain the servers, so now I'm stuck trying to figure out the easiset solution to the problem. These are production servers, so rebuilding the cluster could be beyond scope.
Can I just re-add the servers to the AD Computers OU? Or are there additional tasks that I need to undertake.
Thanks,
BigSam
↧
